Construction organization design and special safety construction plan review system

According to the relevant spirit of the State Council’s “Several Regulations on Strengthening the Safe Work in Production” and the “Regulations on Safe Production Work”, “The construction design and construction plan for all construction projects must have safety technical measures”, in order to technically And take effective measures in management to prevent the occurrence of various types of accidents:

1. The content of the review of safety production organization design.

1 flat layout. In the construction organization design, there must be a detailed layout of the construction plan, a reasonable layout of various facilities, a solid and smooth road, smooth drainage, neat and orderly stacking of materials, in line with safe and civilized construction requirements.

2 Earthworks. According to the excavation depth and soil conditions of foundation pits, ditches, basements, etc., reasonable excavation methods should be selected to determine slopes and support, support, etc. to prevent collapse.

3 The preparation of the temporary electricity use plan for construction shall be prepared in accordance with JCJ46-88 “Technical Specifications for Temporary Use of Electricity on Construction Sites”.

Various electrical circuits and equipment on the construction site must be standardized, including safety distances for overhead lines, set up “three-phase five-wire system” and three-level distribution requirements to set up electrical boxes, use qualified electrical equipment, adopt three-level leakage protection and “one The machine has a brake and a touch, "and other measures.

4 Scaffolding erection plans must conform to the specifications, and the protection of “four ports”, “five borders” and three-dimensional crossover operations should be reliable, and the safety nets (flat net, vertical net) should be laid reasonably and efficiently. Recharge, to ensure quality.   

5 The construction lifts, tower cranes and derricks are located in a proper position, with good stability and stability, and the safety devices are complete and reliable.

6 Fire prevention, lightning protection, anti-virus, and explosion protection measures are correct and effective.

7Civilized construction, reduce noise, control smoke and dust, and use closed-door operations for street and near-residential projects.

2. Requirements for special engineering safety measures.

The so-called special projects refer to the projects with complex structures, high-rise buildings, large spans, high process requirements, and special locations. These projects should compile individual safety technical measures. Such as blasting engineering, large lifting, caisson, caisson, chimney, water tower project, special erection, super high-rise scaffolding, derrick erection and demolition, etc., special engineering safety technical measures must have design basis, strength calculation, and detailed drawings and text Instructions.

3. Seasonal construction safety technical measures.

1 During the construction of the rainy season, the key is to prevent collapse, prevent lightning strikes, prevent electric shocks, and prevent typhoons.

2 Summer construction, the key is to do a good job of cooling the sun.

3 winter construction, key antifreeze, anti-skid, fire prevention and poisoning.

4. The implementation of safety technical measures.

1Before commencement of work, the project manager or the general manager of the technology shall provide a reference for the construction worker, supervisor and operator. In addition to the oral presentation, he shall have written materials, perform the signing procedures of both parties, and indicate the date of submission.

2 The project manager should pay attention to the supervision and inspection during the implementation process.

3 The project department shall establish a system for assessing the implementation of technical measures and objectives.