Fiberglass Flat /Square Aluminum Wire

June 01, 2024

Trademark: Chalco Aluminum
Specification: According to Customer Requirement
Origin: Henan China
HS Code: 7605290000
Trademark: Chalco Aluminum
Specification: According to Customer Requirement
Origin: Henan China
HS Code: 7605290000
Fiberglass Covered Insulated flat|square Aluminum Wire
 
Glass fiber covered flat|square aluminum wire
The electromagnetic wire is made around the conductor or enamel stranded wire wrapped around natural silk or fiber filament (nylon, polyester fiber, natural silk, self adhered wire, etc.).
Features: increase insulation strength, reduce the surface temperature, increase the value of "Q", and has the same characteristics of enameled wire strand.
Applications: multi antenna inductor, high-power lighting system, video equipment, ultrasonic equipment, high frequency inductor and transformer.


The Glass in Fibre Glass Covered Insulated Rectangular Flat Aluminium Wire may be applied in woven tape form or as a continuous fibre. It has proved to be an efficient insulation providing coil winders with higher thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish for dielectric strength to improve mechanical properties.


 
FibreGlass lapped conductors (bare or enamelled) are very suitable for windings of electric motor stators, generators, special transformers and high  voltage motors. In general this insulation  can be applied where high mechanical strength and high insulation properties are required. It exhibits a very high degree of mechanical and thermal stability.

The bare electrical aluminum wire from extrusion process is the most ideal materials to produce Fiberglass Covered Insulated flat|square aluminum wire.
 
Product name and type:
 
Product name Type Product name Type
Single Layer Fibreglass Insulated 
Covered Flat Aluminum Strip Wire		 SGNI-SBLB Double Layer Fibreglass Insulated 
Covered Flat Aluminum Strip Wire		 SGNI-SBELB
Single Layer Fibreglass Insulated 
Covered Round Aluminum Strip Wire		 SGNI-SBLY Double Layer Fibreglass Insulated 
Covered Round Aluminum Strip Wire		 SGNI-SBELY
 
Diameter range (mm) : Flat: a: 1-10 b: 3-35
Temli Class(C) : 155, 180, 200
Product standard : IEC,NEMA,GB,JIS
Resistivity : Aluminum 20ºC<=0.028000Ω(mm)^2/m

 
Feature :
Wrapped smoothly and tightly, without missing layers, bright and clean.
 
Material :
Drawing or extruding bare wire confirm to National Standard. smooth surface, no defects

1. Conductor : aluminum
(1)High conductivity (2)Good solderability (3)High ductility.
 
2. Shape: rectangular,flat,square
Diameters(mm): a:1-10,b:3-35.
 
3. Enamels:
Diphenyl oxide of different temperature classes:130/155/180.
 
4. Layers:
single and double.
 
5. Insulation thickness(retangular):
(1)single:0.3/0.4/0.5 
(2)double:0.2/0.3/0.4/0.5 
(3)fiber and film covered:0.4/0.5/0.6.
 
6. Standards:
IEC NEMA JISGB,such as IEC 60 317, NEMA MW 1000 or JIS C 3202.
 
7. Properties:
(1)High voltage and temperature 
(2)High resistance to abrasion 
(3)Electromechanical properties 
(4)Good adhesion, anti-moist.
 
8. Applicaton of Fiber Glass covered flat|square aluminum wire :
The product is widely used in transformers, electromagnets, welders or other similar products, medium and large electrical appliances winding.
 
Product name Insulation thickness Tolerance %
Double layer fibreglass cover flat aluminum strip wire 0.20 -20%
0.30
0.40
0.50
 
Packaging Details:
Delivery Detail: 2 - 3 weeks ( depends on quantity )
Place of Origin: Zhengzhou, China (Mainland)
Brand Name: Chalco
Material: Aluminum
Port :Shanghai,Qingdao
Payment:T/T,L/C

  Fiberglass Covered Insulated flat|square Aluminum Wire
 
Glass fiber covered flat|square aluminum wire
The electromagnetic wire is made around the conductor or enamel stranded wire wrapped around natural silk or fiber filament (nylon, polyester fiber, natural silk, self adhered wire, etc.).
Features: increase insulation strength, reduce the surface temperature, increase the value of "Q", and has the same characteristics of enameled wire strand.
Applications: multi antenna inductor, high-power lighting system, video equipment, ultrasonic equipment, high frequency inductor and transformer.


The Glass in Fibre Glass Covered Insulated Rectangular Flat Aluminium Wire may be applied in woven tape form or as a continuous fibre. It has proved to be an efficient insulation providing coil winders with higher thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish for dielectric strength to improve mechanical properties.


 
FibreGlass lapped conductors (bare or enamelled) are very suitable for windings of electric motor stators, generators, special transformers and high  voltage motors. In general this insulation  can be applied where high mechanical strength and high insulation properties are required. It exhibits a very high degree of mechanical and thermal stability.

The bare electrical aluminum wire from extrusion process is the most ideal materials to produce Fiberglass Covered Insulated flat|square aluminum wire.
 
Product name and type:
 
Product name Type Product name Type
Single Layer Fibreglass Insulated 
Covered Flat Aluminum Strip Wire		 SGNI-SBLB Double Layer Fibreglass Insulated 
Covered Flat Aluminum Strip Wire		 SGNI-SBELB
Single Layer Fibreglass Insulated 
Covered Round Aluminum Strip Wire		 SGNI-SBLY Double Layer Fibreglass Insulated 
Covered Round Aluminum Strip Wire		 SGNI-SBELY
 
Diameter range (mm) : Flat: a: 1-10 b: 3-35
Temli Class(C) : 155, 180, 200
Product standard : IEC,NEMA,GB,JIS
Resistivity : Aluminum 20ºC<=0.028000Ω(mm)^2/m

 
Feature :
Wrapped smoothly and tightly, without missing layers, bright and clean.
 
Material :
Drawing or extruding bare wire confirm to National Standard. smooth surface, no defects

1. Conductor : aluminum
(1)High conductivity (2)Good solderability (3)High ductility.
 
2. Shape: rectangular,flat,square
Diameters(mm): a:1-10,b:3-35.
 
3. Enamels:
Diphenyl oxide of different temperature classes:130/155/180.
 
4. Layers:
single and double.
 
5. Insulation thickness(retangular):
(1)single:0.3/0.4/0.5 
(2)double:0.2/0.3/0.4/0.5 
(3)fiber and film covered:0.4/0.5/0.6.
 
6. Standards:
IEC NEMA JISGB,such as IEC 60 317, NEMA MW 1000 or JIS C 3202.
 
7. Properties:
(1)High voltage and temperature 
(2)High resistance to abrasion 
(3)Electromechanical properties 
(4)Good adhesion, anti-moist.
 
8. Applicaton of Fiber Glass covered flat|square aluminum wire :
The product is widely used in transformers, electromagnets, welders or other similar products, medium and large electrical appliances winding.
 
Product name Insulation thickness Tolerance %
Double layer fibreglass cover flat aluminum strip wire 0.20 -20%
0.30
0.40
0.50
 
Packaging Details:
Delivery Detail: 2 - 3 weeks ( depends on quantity )
Place of Origin: Zhengzhou, China (Mainland)
Brand Name: Chalco
Material: Aluminum
Port :Shanghai,Qingdao
Payment:T/T,L/C

 

Threaded Pneumatic Angle Seat Valve

Threaded Pneumatic Angle Seat Valve,Threaded Angle Seat Valve,Pneumatic Angle Seat Valve,Sanitary Angle Seat Valve

WENZHOU FOREVER CLASSIC TECHNOLOGY CO.,LTD , https://www.fballvalve.com