1. The LED runs dark for a while, which is caused by the excessive current flowing through the switching power supply lead. It can be checked whether the total current of the lead exceeds the current value of the switching power supply output. If so, replace the power leads. 2. The LED is very bright when it is powered on. After a period of time, it suddenly does not light up or the brightness is attenuated. It can be checked whether the switching power supply is 12V and the LED is misused to be 24V. 3. If there is no problem, check if the input voltage of the switching power supply is 220V. If the LED brightness is high or low: check whether the input voltage and output voltage of the switching power supply are normal. If the voltage is too high, it will cause the LED to burn out; if the voltage is low, it will cause the LED to not light or the brightness to decay. If the voltage of the user's location is very unstable, users may be advised to install a voltage regulator.
Flap discs are made by Aluminum oxide,calcined aluminum, SIC or zirconia coated cloth, also call as power flex discs. Flap discs have the advantages of grinding discs and fiber discs, making it easier for grinding and polishing disposable, reducing the work process and lower the grinding cost.
Abrasive grains include: Aluminum oxide, calcined aluminum, silicon carbide and zirconia.
Flap discs are widely used in grinding and polishing of wood, glass, stainless steel, futniture, mold, metal casting, weld seams and so on. Especially, zirconia power-flex discs fit in sanding seld seam of stainless steel. Flap discs have the features of quick speed, high efficiency, synchronous consumption, strong grinding force, fast heat disspation and good performance.
Flap Disc,Flap Disk,Diamond Flap Disc,Flap Disc For Wood Henan Yuteng Abrasives Co.,Ltd , https://www.henanyutengabrasives.com