Pcbn Blank,Cbn Disc For Cast Iron,Cbn Blank For Cast Iron,Pcbn Disc For Gray Cast Iron HENAN YALONG DIAMOND TOOLS CO.,LTD , https://www.pdcpcbncutter.com
EPchem® AFRC/12-C is polyolefin based material containing inorganic flame retardant, antioxidant, lubricant, etc., produced by mixing, plasticizing and then pelletizing. AFRC/12-C has the characteristic of self extinguishing, can greatly reduce the emission of toxic corrosive gas and smoke. AFRC/12-C meets the RoHS and REACH, is particularly suitable for the public places demanding high security and appropriate for communication cables, date cables and so on.
Characteristics
Properties
Unit
Standard
Typical value*
Test method
Density
g/cm3
≤1.5
1.493
GB/T 1033.1-2008
Tensile strength
MPa
≥10
11.7
GB/T 1040-2006
Elongation at break
%
≥150
170
GB/T 1040-2006
Mechanical properties after ageing
ºC×h
110×168
110×168
GB/T 2951.12-2008
Rentention Rate of Tensile strength
%
≥70
104
Rentention Rate of Elongation at break
%
≥70
80
Hot deformation (90ºC*4h)
%
≤50
Pass
GB/T 8815-2008
Brittleness temperature by impact (-25ºC)
Invalidation
≤15/30
Pass
GB/T 5470-2008
Volume resistivity (20ºC)
W.m
≥5×1011
1.7×1012
GB/T 1410-2006
Dielectric strength
MV/m
≥20
34
GB/T 1408.1-2006
Oxygen index
%
≥35
42
GB/T 2406.2-2009
Smoke density
Flame
Â
≤100
43
GB/T 8323-2008
Non-flame
Â
≤250
226
Content of halogen acid gas
mg/g
≤5
1.3
GB/T 17650.1-1998
PH
Â
≥4.3
5.7
GB/T 17650.2-1998
Conductivity
μs/mm
≤10
1.1
Toxicity index
Â
≤5
1.3
NES 713-1985
Processing
AFRC/12-C has high liquidity and good processing performance, can be well processed using a low compression ratio (1.2 ~ 1.8) screw. PVC screw can also be used, but should be equipped with an adequate barrel thermoregulation; Polyethylene screw is not advisable. In general we recommend the following processing conditions:
   Zone1   Zone2   Zone3  Zone4    Zone5     Die
   110ºC  120ºC  135ºC 145ºC  150ºC  150~165ºC
The above temperatures are for reference only. But the melting temperature should not exceed 170ºC.
AFRC/12-C can be extruded by squeeze die but also squeeze tube die.
AFRC/12-C includes black and natural color. Users are free to add color masterbatches to natural color material. The suggested weight ratio is 1.5% or so.
          Â
Storage
These compounds must be stored under the following conditions:
Package
To be packed in aluminum foil bag inside and kraft paper bags outside, 25kg net each; or damp-proof cabinets on pallet, 1000kg net each.
The workshop:
Package :
Â
Introduction
EPchem® AFRC/12-C is polyolefin based material containing inorganic flame retardant, antioxidant, lubricant, etc., produced by mixing, plasticizing and then pelletizing. AFRC/12-C has the characteristic of self extinguishing, can greatly reduce the emission of toxic corrosive gas and smoke. AFRC/12-C meets the RoHS and REACH, is particularly suitable for the public places demanding high security and appropriate for communication cables, date cables and so on.
Characteristics
Properties
Unit
Standard
Typical value*
Test method
Density
g/cm3
≤1.5
1.493
GB/T 1033.1-2008
Tensile strength
MPa
≥10
11.7
GB/T 1040-2006
Elongation at break
%
≥150
170
GB/T 1040-2006
Mechanical properties after ageing
ºC×h
110×168
110×168
GB/T 2951.12-2008
Rentention Rate of Tensile strength
%
≥70
104
Rentention Rate of Elongation at break
%
≥70
80
Hot deformation (90ºC*4h)
%
≤50
Pass
GB/T 8815-2008
Brittleness temperature by impact (-25ºC)
Invalidation
≤15/30
Pass
GB/T 5470-2008
Volume resistivity (20ºC)
W.m
≥5×1011
1.7×1012
GB/T 1410-2006
Dielectric strength
MV/m
≥20
34
GB/T 1408.1-2006
Oxygen index
%
≥35
42
GB/T 2406.2-2009
Smoke density
Flame
Â
≤100
43
GB/T 8323-2008
Non-flame
Â
≤250
226
Content of halogen acid gas
mg/g
≤5
1.3
GB/T 17650.1-1998
PH
Â
≥4.3
5.7
GB/T 17650.2-1998
Conductivity
μs/mm
≤10
1.1
Toxicity index
Â
≤5
1.3
NES 713-1985
Processing
AFRC/12-C has high liquidity and good processing performance, can be well processed using a low compression ratio (1.2 ~ 1.8) screw. PVC screw can also be used, but should be equipped with an adequate barrel thermoregulation; Polyethylene screw is not advisable. In general we recommend the following processing conditions:
   Zone1   Zone2   Zone3  Zone4    Zone5     Die
   110ºC  120ºC  135ºC 145ºC  150ºC  150~165ºC
The above temperatures are for reference only. But the melting temperature should not exceed 170ºC.
AFRC/12-C can be extruded by squeeze die but also squeeze tube die.
AFRC/12-C includes black and natural color. Users are free to add color masterbatches to natural color material. The suggested weight ratio is 1.5% or so.
          Â
Storage
These compounds must be stored under the following conditions:
Package
To be packed in aluminum foil bag inside and kraft paper bags outside, 25kg net each; or damp-proof cabinets on pallet, 1000kg net each.
The workshop:
Package :
Â
Hffr Compound for Signal Cable High Oxygen Index
Model NO.: AFRC/12-C
Trademark: EPCHEM
Transport Package: Aluminum Foil Bag
Specification: polyolefin
Origin: Shanghai
HS Code: 3902900090
Model NO.: AFRC/12-C
Trademark: EPCHEM
Transport Package: Aluminum Foil Bag
Specification: polyolefin
Origin: Shanghai
HS Code: 3902900090
Introduction