Philizon focus on Greenhouse High Power LED Grow Lights and Full Spectrum LED Grow Lights Manufacturer China,Produce The Best Yields, Run More Efficiently, Use Half The Electricity Of Double Ended HPS.
LED grow lights are the most recent mass produced lamp on the market,although many people have not begun using them yet. Since the tiny LEDs might not be the first thing that you think of when you picture an indoor grow up,that is understandable.In reality,however, they truly are some of the most powerful,effective,and space saving grow lights that you are going to come across throughout your growing career.
Advantages
Plug with listed certificate safe to use.
Full Spectrum High Power LED Grow Light and High PAR for Plants growth.
Product Images
The Plug you can choose
Ageing Test
Application
Our professional High Power LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Package
Quality Control Systems
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
New Design Grow Light,High Power Grow Light,High Power Grow Lamp,Led High Power Grow Light Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumgrowlight.com
How to improve the service life of concrete pump?
Now in the construction project, the concrete pump has joined our engineering work, a pump is not cheap, but in the course of it will inevitably be damaged, Intel machinery to tell you today, the concrete pump at work , How to improve his service life, 1, the transfer pipe connection takeover, we must pick up from the pump outlet, from the front to the back, must not connect the first two, then the middle. Incorrect connection will result in "internal forces" between the pipes, which can easily cause the pipes to break off from the joints. After the pipe is connected, the outlet of the pump machine, the bend pipe and the vacant pipe should be fixed firmly to prevent the pipeline from moving and damaging the pipe. Since the closer the pump, the higher the pressure of the concrete in the pipe, so in the outlet of the pump to use the new wall thickness of the pipe, the thin wall of the old pipe used in the pump far away, which can improve the use of the pipeline Lifespan, while reducing the possibility of squibs. For the elbow, wear the most serious is away from the pump side, it is often appropriate to turn around the elbow to extend its service life. 2, the cutting ring and the maintenance of the glasses plate Cutting ring and the glasses plate is a pair of close, with the relative movement of the components, both the contact surface are welded with a layer of wear-resistant materials, through the end of the S-shaped tube spline shaft shaped nut , Adjustable gap between the two 0.1 ~ 0.2mm. A rubber spring fitted between the S-tube and the cutting ring allows relative flexibility between the cutting ring and the eyeglass plate. As the service life is extended, the rubber spring loses its elasticity and the joint surface between the cutting ring and the lens plate will wear out, resulting in an increase in the clearance between the two. When the gap 0.7mm, the need to immediately adjust, or pump the mortar will be "gap" into. Once the mortar into the friction surface, the cutting ring and the wear rate of the lens plate will be greatly accelerated. Pumping concrete, the cutting ring with the S-shaped tube swing and swing, plays the role of cutting concrete, cutting ring wear faster, the higher the pressure at the exit of the concrete, cutting ring wear more serious. Typically, the wear of the cutting ring first occurs at the edge and at two symmetrical positions at an upper angle of 90 °. Therefore, when the cutting ring wear the above parts, the cutting ring can be rotated in an angle after the continued use, which is equivalent to the cutting ring life doubled. Wear glasses first occurred in the middle of the bridge of the nose, the greater the gap between the lens plate and the cutting ring, the wear faster. Therefore, we must always pay attention to the gap between the lens plate and the cutting ring, once found to increase the gap, you need to immediately tighten the nut or replace wear parts to prevent mortar into the friction surface. When the rubber spring loses its elasticity, it needs to be changed immediately. For the repair of the cutting ring and the lens board, D507 welding rod can be used after welding. 3, discharge port, tapered pipe, distribution valve to be used correctly For the discharge port, tapered pipe, distribution valve and other wearing parts, wear layer is found once worn away, and timely use of D507 electrode surfacing, can still be used a period of time. Due to the different working conditions of different sites, such as the level of concrete, the distance and height of pumping, etc., the service life of wearing parts such as cutting ring and eyeplates differ greatly at different sites. However, as long as the pump is properly used and handled, Machine wearing parts life can be greatly extended. 4, pay attention to piston and conveying cylinder lubrication Pistons generally made of polyurethane materials, more flexible wear, conveying cylinder wall also coated with wear-resistant materials. There are two types of lubrication between the piston and the transfer cylinder: one is automatic lubrication, each pump once, the fuel system automatically adds a lubricant; the other is a manual fuel system, artificial regular refueling. For automatic refueling system, the need to regularly check the oil flow is smooth, otherwise once the oil blocked, the piston and the transmission cylinder will be worn; For manual refueling system, the operator should be based on the different working environment, regular replenishment of lubricants, usually Hour Keep in mind: When refueling, be sure to point the piston to the bottom of the vertical refueling point, so that the oil just into the middle of the piston tank. Pumping process, the operator often have to "hold cylinder" operation, that is, in the main cylinder piston to the end point, the operation of the jog button for 5 to 8 seconds to replenish the main cylinder closed the hydraulic oil reservoir to Take full advantage of the delivery cylinder stroke, to avoid local wear cylinder. Should also pay close attention to the water tank, once found that the water has turbidity or sand in the water, indicating that the piston may wear and need to replace the piston in time, otherwise it will aggravate the wear of piston and conveying cylinder. If the replacement of the new piston, the water quickly turbid change, it shows that the transport cylinder has worn, the need to replace the transport cylinder. If there is a condition, the method of measuring the diameter of the cylinder can be used to judge whether the conveying cylinder is worn or not. Usually, the chrome layer thickness on the inner wall of the cylinder is only 0.2-0.25mm. When the cylinder diameter increases by 0.45-0.55mm, the conveying cylinder needs to be replaced. Remember, the water temperature of the cooling water in the tank is also very important, the water temperature is too high, will also aggravate the wear of the piston, often need to change the cooling water in the water tank. Only properly used, our pump can increase its service life, better for our work, Intel mechanical concrete pump, good quality, long service life.
Upgraded Epistar chips,High Lumen,High penetration.
Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.