Teak is the king of Wanmu, the world's most valuable tree species. It is called “National Tree†in Thailand, Indonesia and other countries. Teak is rich in oil and oil. It has the magical effect of moisture-proof, insect-proof, anti-ant and anti-corrosion. It is durable and extremely stable. It is not easy to deform, and has good elasticity and comfortable foot. After oxidation by photosynthesis, its color becomes golden yellow, which is very decorative. It is the best in teak furniture, and it is the ideal wood for doors, stairs, cabinets and various furniture. Then in order to prevent bleed, GO Jiaju Xiaobian teaches you how to paint teak furniture! First, choose the primer If a shellac varnish, lacquer or natural varnish is chosen for the furniture, the traditional primer should be a diluted white shellac varnish. This basic primer is a mixture of 1 part of white shellac varnish (about 1.8 kg) and 3 to 4 parts of denatured alcohol. Shellac varnish is suitable for most refurbishment work, but it cannot be used with polyurethane varnishes, aqueous colorants or NGR colorants that do not cause textured bumps. When shellac varnish is not available, the easiest primer to use is the commercial primer. The sanding primer dries very quickly and provides a very good basis for sanding; it can also be used with varnishes, shellac varnishes and nitrocellulose lacquers. If you plan to apply a layer of polyurethane varnish to your furniture, please read the manufacturer's label carefully; as the primer may conflict with the polyurethane paint. There is no need to seal before applying the resin penetrating primer. Below the natural varnish or lacquer lacquer layer, some professionals prefer to dilute the mixture of the same topcoat and then use it to close the wood. Pour turpentine or mineral spirits into the varnish and dilute in a 1:1 ratio to make a natural varnish closure. A nitro-blocking primer was prepared by diluting the nitrocellulose lacquer and banana water in a ratio of 1:1. None of these primers can be used with shellac varnish or polyurethane varnish. Polyurethane varnish requires special handling. Please read the label carefully when purchasing. Some polyurethane paints can be diluted with specific diluents; manufacturers may recommend using a diluted varnish layer as a primer. Some polyurethane paints do not require the use of a primer. If you must close the colorant or filler before brushing the polyurethane paint, make sure the primer is compatible with the varnish. Otherwise, an osmotic resin primer is used. Wood refurbishment is completely over, but if you want it to look smoother, apply a layer of polyurethane paint to its surface. Second, the back cover skills Use a clean brush to apply the primer to the surface of the wood quickly and evenly along the texture of the wood. Make sure the primer covers all surfaces evenly and pay special attention to any endface texture. If the end face texture is not treated well, the colorant and topcoat it absorbs will be deeper than the other parts. Let the primer dry thoroughly: the diluted white shellac varnish takes about two hours, while the commercial polish primer takes about an hour. Then gently sand the surface of the wood with fine sandpaper No. 7/0. The wood needs to be polished very smoothly, but the primer must not be worn out. Remove all the debris from the sanding with a coarse cloth. If you apply a layer of paint directly to the polished wood, you may need to apply multiple layers of primer to completely seal the pores in the wood. In this case, wait until the first primer is completely dried before brushing another primer. Some porous wood may need to be coated with several primers. Coloring teak furniture not only significantly improves its appearance, but also hides some embarrassment. Although it may take some effort to color the furniture, when you see the beautiful colors of the furniture, you will feel that the labor is worthwhile. The article was compiled by Shanghai GO Jiaju Xiaobian wire holder is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting the wine glass holder. Goblet Rack,Stainless Steel Goblet Rack,Wine Glass Holder,Wine Glass Rack Shenzhen Lanejoy Technology Co.,LTD , https://www.wire-spring.com
China leading manufacturers and suppliers of Wine glass holder,Goblet Holder, and we are specialize in Wine Rack,Hanging Wine Rack, etc.