Before the renovation owners were ready to start construction, they all communicated with the designers according to their own ideas. The preliminary plan was thus determined. However, the presentation of the plan requires detailed drawings, so how many sheets should the drawings be? What kind of drawings are complete and reasonable, can we correctly guide the later construction? To this end, the industry pointed out that the home improvement design is the basis of construction. In order to ensure the smooth construction of the later stage and the high quality of the process, the drawings in the early stage should be fine and complete, and the schematic drawings should not be used to fool the owners. Therefore, the decoration owner must check the drawings and check the drawings. Chen Shifu, who has been engaged in the home improvement construction industry for many years, said that according to the relevant regulations of the industry, the architectural decoration and decoration project must be designed and issued complete construction drawings and design documents. As you can understand, in addition to the floor plan, top view, elevation view, section view and large sample, you should also get the hydropower transformation map from the designer. It should be noted here that the decoration owner should first give the original structure of his house in order to review the structural changes during construction and to assess the safety of the house. According to Master Chen, the drawings came out. As the decoration designer of the layman, the design drawings should be considered from the big point and detailed, and the whole and the details should be combined, and the whole part should be coordinated and unified, and combined with the explanation of the designer. A complete understanding of the entire set of drawings. For some owners who only look at the renderings, Ms. Huang, a senior designer in the industry, said that many decoration owners have to look at the renderings at first, but they often overlook the construction drawings, so the beautiful “future home†on the renderings, the scene After being produced, it is often far from the design drawings. In fact, the reason for checking is that the designer did not make the design drawings according to the construction drawings, but made the drawings according to the wonderful pictures. The result is unrealistic and disproportionate. Therefore, when reviewing the drawings, the owner of the decoration should first pay attention to whether the ratio of the drawings is correct. Ms. Huang pointed out that after checking whether the scale is correct, it is necessary to check whether the dimensions marked on the drawings are standardized. It is understood that some design drawings because the designer did not make careful and detailed measurements on the site where the construction is to be carried out, so many dimensions are missing during the design, especially some key dimensions. If it is not clear at the time of design, it is very likely that during construction. There is a disconnect between design and construction. Master Chen said that for this situation, in fact, many careless designers have shown on the drawings, but the decoration owners do not know how to view, so in the later construction, there are often random changes, the result is side loading Side repair, nondescript. After the initial review of the program, the owner will focus on the materials on the drawings. Mr. Zhou, a budget auditor of a home improvement company, said that under normal circumstances, owners often only care about the quotation of the decoration company, worrying about being deceived, over-budgeted, and carefully checking one item. In fact, the name of the main material and the type of the material should also be indicated on the design drawings, which is very beneficial for the construction workers to follow the drawings. According to Mr. Zhou, although many owners are not experts, as long as the materials and process descriptions are marked on the drawings, they can be understood. Therefore, the designer should be required to mark the necessary manufacturing process in the construction drawings. Suqian home network editor, the article comes from the Internet. Silicone Lamp,Kids Night Light,Colorful Silicone Lamp,Rechargeable Silicone Lamp Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com