Coat Hook Oak,Coat Hook Knobs,Coat Hook Pegs,Coat Hook Shoe Rack Heshan Zhongxin Sanitary Ware Ind., Co., Ltd , https://www.baolongfaucets.com
1. Rough grinding and flat grinding (grinding) Diamond grinding discs for stone grinding machinery; diamond bituminous, resin grindstone (36 mesh, 60 mesh) or stone refurbished pieces (30 mesh, 50 mesh) Grinding, processing, and other reasons, such as the cutting, unevenness and scratches caused by the construction process, etc., while removing the weathering layer and pollution of the stone surface.
Second, fine grinding is the use of stone grinding machinery with 120 mesh, 240 mesh, 400 mesh diamond grinding disc, diamond bituminous, resin grindstone or 150 mesh, 300 mesh, 500 mesh stone refurbished sheet for rough grinding (grinding) The ground stone is ground to eliminate the scratches left by the rough grinding (grinding), further adjust the flatness of the polished surface, and lay a good foundation for the subsequent fine grinding. So the purpose of fine grinding is to eliminate scratches.
Third, the stone inspection and repair treatment After rough grinding and flattening, carry out an inspection and repair, repair is to use resin or stone marble glue, the stone plate surface cracks, collapsed corners to find out. The purpose of the repair is to repair the damage. After fine grinding, it should be repaired again, and the resin or stone marble glue should be used to repair the broken part of the crack and the area where the caulking agent is not full or peeled off, so that the gap and the collapse angle can be flat and full. Effect.
Fourth, fine grinding and polishing Fine grinding is to use 800 mesh, 1200 mesh resin polishing stone and resin grinding stone last polishing head 5EX, 10LG or 1000 mesh, 2000 mesh, 3000 mesh water grinding sheet for fine grinding and polishing the ground. After the fine grinding, the gloss is improved very high, the surface density of the marble stone is improved, and the gloss is generally up to 70 degrees. The purpose is to: brighten and polish.
Fifth, the stone surface recrystallization hardening treatment stone recrystallization hardening treatment concept: the stone crystal flour special material under the action of machinery by means of the heat generated by friction, combined with the structure and structure of the stone surface layer and micro-rheological reaction, Thereby producing a blended crystalline layer with a relatively hard texture and a bright texture to improve the hardness and wear resistance of the stone.
1. Use the all-purpose cleaner first, and clean it thoroughly with the equipment and red scouring pad.
2. Adjust the marble powder from 1:1 into a paste with water and apply it to a red polishing pad. Grinding directly on the stone, the calcification reaction of the stone surface, so that the stone restores the brightness as new.
New stone renovation plan
Abstract The surface of marble and granite is dirty, worn and scratched, and can be refurbished. Professional renovation equipment must be used for refurbishment. When renovating, the special grinding discs and polishing powders of Taili stone or granite should be selected according to the stone type, and the order of the grinding discs should be strictly arranged from coarse to fine...
Marble and granite surfaces are dirty, worn, scratched and can be refurbished. Professional renovation equipment must be used for refurbishment. When renovating, the special grinding discs and polishing powders of Taixue or Granite should be selected according to the stone type, and the grinding should be carried out from coarse to fine according to the order of the grinding discs, in order to achieve the ideal polishing effect and achieve ground renovation. maintenance.