The moisture content of the decorative door should be lower than 12%. The material standard should be the same as other wood products. The processing should be fine, no clear eye, no burr, Russian, semi-glass, full glass door glass frame processing should be accurate, close the line complete. The quality standard of the solid core decorative door is: the filling in the door leaf is full, the wood strip trimmed on the door side is firmly connected with the inner frame, the decorative panel and the frame are firmly bonded, no warping, crack, the board surface is flat and clean, no Thrift, insect eyes, cracks and rot spots, clear wood grain and beautiful texture. The quality standard of the plywood decorative door is that the veneer and the frame are firmly connected, without curling and cracking. The wood strip and the inner frame of the door leaf are firmly connected. The horizontal and vertical keel of the inner frame meet the design requirements, and the hinge should be installed. There is a horizontal keel, the board surface is flat, clean, no thrift, insect eyes, cracks and rot spots, the wood grain is clear, the texture is beautiful, and the thickness of the board surface must not be less than 3 mm. Steel Structure House,Modular House,Modular Steel House,Structural Steel Frame House Foshan Shengbang Steel Structure Co.,Ltd , https://www.fssbssteel.com