Reduced Shank Drill Bits,Stainless Steel Drill Bits,Galvanized Pipe Drill Bits,Reduced Shank Drill Bit Set Danyang Yongshun Tools Co.,Ltd , https://www.ysdrillbitset.com
1. Reserved track slot Advantages: Safe and secure Disadvantages: not beautiful, there are gaps, difficult to clean, construction is complex, and can not be removed modification Note: single track width should be 4.5cm, height 4cm; double track height should be 9cm
2, with a special double-sided adhesive paste on the floor Advantages: easy construction, can be repeated demolition modification shortcomings: In contrast, poor safety Second, the installation of points
1. The spacing of the hanging rail fixing screws ≤ 20cm;
2. The hanging rail should be straight after installation. The top surface of the hanging rail should be close to the bottom of the door frame. There should be no gap between the bottom of the door frame and the top of the hanging rail so as to avoid large vibration and noise;
3. After the frame of the hanging wheel is fixed on the door, the height and level of the door can be adjusted by connecting the screw or the rotation of the board on the bracket. Generally 5mm below the ground is better;
4, hidden is the width of the sliding door should be 30-60mm larger than the opening;
5. The position of the stopper is not to collide with the door and frame but the gap is the minimum;
6, the positioner should be on the side of the door vertical
Sliding door installation and installation points
One or two installation methods