The recent global turmoil is extremely complicated. To sort out, the international events that have a major impact on the commodity market in the next stage are mainly Japan's post-disaster reconstruction plan and the evolution of the Middle East in North Africa. For now, the demand for bulk commodities and raw materials for the redevelopment plan will be the main source of incremental demand for commodities in the medium term. The overall recovery of the US economy is relatively clear, and both economic growth and employment have improved significantly. However, the US real estate industry is still weak. New home sales fell 16.9% in February, falling to a record low of 250,000 units, far below the expected 290,000 units. US home sales in February fell 9.6%. After adjusting for seasonal factors, existing home sales were converted to an annual rate of 4.88 million units, the lowest level since November last year, and prices fell to the lowest level in nearly nine years. Portugal has also recently raised some new questions about the budget. The European debt problem may be repeated in the next stage, but it will not become the dominant factor in the commodity market. At present, the war in Libya is in full swing, and Yemen has also experienced serious internal division problems at this point in time. If Yemen is not effectively controlled, the threat to the West will be even greater. In addition, the current unstable situation has shown a clear spread, and these will increase the uncertainty of the global economy. The domestic situation is clearer than the global situation. Inflation will peak in the second quarter because of food prices. And due to the tightening of credit and the impact of policies on real estate investment, economic growth will gradually return to the average in the second quarter. It seems that the changes in monetary policy will be seen in the third quarter. This time may overlap with the reconstruction project in Japan, which will have a big advantage for industrial products, especially metals. The regulation of domestic real estate can only seem to seek the golden mean. The sharp drop in real estate prices will damage the so-called "middle class", that is, the interests of housing people, and the rapid rise of real estate prices will damage the interests of most ordinary people. Therefore, it is estimated that in the future, nominal house prices will maintain a steady or slower growth rate, while gradually lowering the real price of real estate through higher inflation levels. In general, in the short-term, the unstable Middle East in North Africa will lead to the upward trend of oil prices, and the rise in oil prices is more understood as a risk premium in the short term, and will not be transmitted to the price of bulk commodities through cost. In other words, in the short term, we will see the trend of oil prices and other commodities deviate. In addition, one problem that investors need to pay attention to is that the impact of the recent increase in the reserve ratio on commodities is not only reflected on the day of the announcement of the policy or the second trading day, but the probability of extreme market on the contribution date of the reserve. It seems bigger. In the medium term, if the global economy stabilizes, Japan's incremental demand will raise the marginal price, that is, incremental demand will boost prices.
The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.
Material characteristics
1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.
2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.
3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.
4. The lamp frame is made of high quality stainless steel.
5. Fasteners bolts and nuts are stainless steel.
6. Light source:400W-1000W sodium lamp.
Specifications:
Height: from 18m to 50 m
High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com
Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.
Shape: round, multi-pyramidal, column form, polygonal or conical
Material:
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
Tolerance of Dimension: ±2%
Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²
Light plate: Various figure of selection ,material with hot dip galvanization steel frame
Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut
Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode
Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles: Insert mode, inner flange mode, face to face joint mode .
Design of pole: Against earthquake of 8 grade
Wind Speed: 80 Km/Hour
Welding: We has past flaw testing. Internal and external double welding makes the welding in shape
Thickness: 6 mm to 20 mm
Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging
Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required
The global situation is confusing, and there are still concerns about non-ferrous metals in the short term.
Abstract Recently, the global situation is confusing and extremely complicated. To sort out, the international events that have a major impact on the commodity market in the next stage are mainly Japan's post-disaster reconstruction plan and the evolution of the Middle East in North Africa. At present, the demand for bulk commodities and raw materials for the reconstruction plan will be in the commodity...