Floorpaint Tools,Floor Paint Harrow,Paint Roller Brush,Epoxy Resin Spike Roller Jiangmen Nichiyo Decorative Material Co.,Ltd. , https://www.nichiyopt.com
The welding method of the pole is often done by hand welding and automatic welding. There are traditional gas welding in automatic welding; induction heating welding; tungsten arc welding.
The welding process of the poles includes the following two types.
1 forklift battery pole welding quality is very important for the battery, usually the minimum 6mm welding area to ensure complete welding, must have: a. Stable mechanical strength in the case of vibration; b. High current conductivity; c. The weld zone has strong acid resistance; d. Prevents the risk of solder joint cracking and microstructural changes under heat.
Improvement of 2-pole welding process: a. Induction heating welding technology; b. Tungsten arc welding technology. Welcome to http://Learn more about battery.
What is the welding process of the forklift battery pole?
The structure of the battery pole of the forklift depends on the size of the battery model and the battery capacity. The poles are the most commonly used outer pole structure, and the colloidal sealed battery also uses this pole structure.