What are the advantages and disadvantages of hydraulic and pneumatic systems in fluid control?
These beads are coated with a special coating during the manufacture of the glass beads. In the rainy and foggy weather, the moisture can not easily adhere on the surface of glass beads, so the effection on reflectivity caused by bad weather will be reduced. The granulometry of this type glass beads is the same as non-coated glass beads.
The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, JIS R3301 and KS L2521 etc.
What are the advantages and disadvantages of hydraulic and pneumatic systems in fluid control?
1. Advantages of the hydraulic system:
1The hydraulic fluid for hydraulic control is used as the working medium, so the heat generated by the loss of power can be taken from the place where it is generated, so that the size of the component can be greatly reduced under a certain power condition;
2 From the impact of the load, the hydraulic system has mechanical rigidity, used in the closed-loop system, the positioning stiffness is large, and the position error is small;
3 Compared with the mechanical mechanism, the hydraulic actuator has higher response speed, can start, brake and reverse at high speed, and its torque-inertia ratio is also larger, so its acceleration ability is stronger;
4 hydraulic transmission is easy to achieve stepless speed regulation, with its own lubrication and other advantages.
2. Disadvantages of the hydraulic system:
1 It is easy to leak oil, which will affect the smoothness of the movement and reduce the efficiency;
3 oil is flammable and has the risk of causing an explosion;
4 The viscosity of the liquid is affected by the temperature, which makes the oil supply and the movement speed of the actuator unstable;
5 air in the oil will cause uneven running of the working mechanism;
6 In terms of the functions of mathematical operations, error detection, amplification, testing and compensation for processing small power signals, hydraulic devices are not as flexible, linear, accurate and convenient as electronic or electromechanical "target=_blank> electromechanical devices, and thus are in the control system. The low power part is generally not suitable for use, and is mainly applied to the power part of the system.
3. Advantages of pneumatic system:
1 Pneumatic control is faster and more convenient than hydraulic control;
2 The components and working medium used are low in cost and are convenient for automatic modification of existing machinery and equipment.
4. Disadvantages of pneumatic system:
1 The movement is not stable;
2 there is noise;
3 The size of the control element is large.
----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Moisture Proof Glass Beads,Moisture Proof Glass Beads Road Marking,Reflective Moisture Proof Glass Beads,Moisture Proof Solid Glass Beads
CHIYE GLASS BEAD (HEBEI) CO., LTD , https://www.chiyeglassbeads.com