ã€China Aluminum Network】 Glazing on both sides of the glass. After sanding, the film on the glass surface is destroyed and a layer of glaze is applied. Once broken, the glass is easily broken. Inlaid glass is less safe because after it is smashed, it is a sharp water chestnut. Fingers that touch glass fragments can scratch the skin. Ordinary white glass is also easily broken and wounded during transportation, and less is better. Heat-absorbing coated glass Chaoyang or West Sun room aluminum alloy door and window glass should be coated with heat-absorbing glass; Chaoyang or the West drying room, can choose to heat the outside of the coated glass, indoor side of the use of ordinary white glass. Because the heat absorbing glass absorbs infrared rays, it can attenuate 20%-30% of the solar energy, thus reducing the heat energy that enters the room. In summer, the load of air conditioners can be reduced. In winter, due to the absorption of infrared light, the temperature of the air conditioner rises. Can resist the cold outside, but also to achieve energy-saving effect. Because the heat-absorbing glass is a colored glass, the decorative effect is also obvious at the same time as saving energy. Insulating glass Hollow glass is more energy-efficient. Because the thermal conductivity of the sealed middle air layer is much lower than that of glass, the thermal insulation performance of the insulating glass can be doubled compared to that of the single glass, and the power consumption of the air-conditioned building can be greatly reduced. Hollow glass insulation can be more than 70% in the summer, winter is not easy to lose indoor heating, reduce heat loss up to 40%, play a role in insulation, which will be cool and warm in summer into a reality. Tempered glass Tempered glass is a safety glass. Tempered glass is actually a kind of prestressed glass. In order to increase the strength of glass, chemical or physical methods are usually used to form compressive stress on the glass surface. When the glass receives external force, the stress of the surface layer is firstly offset, so that the carrying capacity is improved, and the self-resistance of the glass is enhanced. Wind pressure, impact and so on. Tempered glass is now widely used in high-rise building aluminum alloy doors and windows, glass curtain walls, indoor partition glass, lighting ceiling, sightseeing elevator access, furniture, glass guardrails and so on. If the indoor and outdoor glass are made of tempered glass, the impact resistance and safety of the glass are greatly improved both indoors and outdoors. Because the impact resistance of tempered glass is 5-10 times that of ordinary glass, its flexural resistance is 3-5 times that of ordinary glass, and its safety performance is greatly improved. Explosion-proof glass An ordinary white glass and tempered glass cannot withstand a force of 30-50 kilograms, but after the rubber is laminated, the surface is covered with a layer of things (such as the explosion-proof glass film of PVC, PT, PP, etc. of Li Yiyi Glass). ) After strengthening, it is also called laminated glass and explosion-proof glass. Ordinary glass originally could withstand 50 kilograms. After adding laminated glass, it can withstand 300 kilograms, which is called explosion-proof glass. Tempered glass Tempered glass is a tempered glass and ordinary glass paste a decorative film, it is called tempered glass. Tempered glass is based on the existing reinforced glass, plus a layer of film that is not easily damaged. It is called strengthened glass. Ordinary people misunderstand the glass, PVC film attached to the glass, the glass impact force increased, will not hurt after the impact fell, can only be called enhanced, can not be called explosion-proof. Projection Light Imaging Lens Module,Uv Light Curing Module,3D Printer Curing Module,Led Optical Lens Panel Dongguan Lianlong Photoelectric Technology Co., Ltd , https://www.lianlonggd.com