Metal Material Tensile Testing Machine, Tensile Strength Testing Machine, Metal Material Tensile Testing Machine Do you know the calibration method of the metal material tensile testing machine? The force value correction of the tensile testing machine (metal material tensile testing machine): enter the computer program After opening the calibration interface, press the test to start, take a standard weight weight and hang it on the upper clamp connector, record the computer display power value, and calculate the difference from the standard weight weight, the error should not exceed ±1%. Manual Pallet Stacker,Hydraulic Manual Stacker,Stacker Manual,Hand Stacker Electric Guangdong Gongyou Lift Slings Machinery CO.,LTD , https://www.gongyouslings.com
Speed ​​correction of tensile testing machine (metal material tensile testing machine):
First, record the initial position of the crossarm of the machine, and select the speed value on the control panel (measure the crossbar stroke using the standard straight steel ruler).
2. At the same time, the electronic stopwatch starts to count for one minute. When the stopwatch arrives at the time, press the stop button of the machine. According to the time of the stopwatch, record the cross-travel stroke value as the rate per minute (mm/min). The difference between the stroke value and the straight steel ruler, and calculate the cross-arm stroke error value, should not exceed ±1%.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn