After buying a new home, most users will not be satisfied with the construction of the home. At this time, the indoor structure will often be changed through the way of wall removal and renovation. But do you know? The interior walls are not easily demolition and modification. If the mistakes are taken, there will be serious consequences. Therefore, the demolition of the wall is not a simple “unlike to knock, need to re-build,†there are many places in the house Is it "sensitive" and "forbidden area"? What are the considerations for the demolition of the wall ? Let's take a look with Xiao Bian below and hope to provide some help for your decoration. What are the notices for wall demolition? 1. Note that only non-supporting walls can be removed and modified Before preparing for construction, it must be clear which walls are removable and which are not touchable. Otherwise, the consequences are inconceivable. In general, the removable walls are only non-load-bearing walls and are usually relatively thin, about 10 cm thick. In addition, these walls are often indicated on the floor plan. 2, pay attention to consider the transformation of the circuit pipeline Before the demolition, careful consideration must be given to the improvement of the circuit. In general, circuit lines are often found in the walls. Therefore, care must be taken not to savagely construct and break the circuit. After all, circuit reconstruction is a very watery part of the project cost. If you do not want the decoration company to earn you too much money, you must plan ahead. 3, add a new wall to select materials according to the situation In the case of high-rise housing, most of them use a frame structure. The interior wall is a light-framed wall and acts only as a divider. It has little support for load-bearing. Therefore, it is recommended that the same cement be used when adding a wall. Light walls such as panel walls or gypsum boards, of course, can also be based on their own circumstances to select materials with better sound insulation or cost-effectiveness. 4, looking for professional and experienced decoration company Since many homeowners are not clear about what the structure of their house is, it is advisable for experienced personnel to take a look and understand the structure of the wall before deciding to avoid the danger of accidental demolition. Before it was reported to the property management department for record, it could be constructed only after it was approved. Where can the wall not be changed? 1, bearing wall In the demolition of this type of wall, most of the house owners do not understand this type of wall. However, as to what types of walls are load-bearing, it is estimated that not many people can make it clear. In general, brick walls above 24cm are The load-bearing wall can't be demolished and changed. The walls that have sound when they are struck are mostly non-bearing walls and can be demolished and changed. Of course, it is recommended that when demolition is made, professionals are required to take a look and confirm the construction. 2. Steel bars and columns in the wall If the building is built like a person's body, then the steel in the walls is the body's bones. Therefore, if the steel is damaged when the pipeline is installed, it will affect the endurance of the wall and the floor. If an earthquake is encountered, such Walls and floors can easily collapse or break. In addition, beams and columns cannot be tampered with. It is mainly used to support the upper floors, and the upper floors will fall when they are removed. Summary: The article is about the wall demolition reform precautions which explain what knowledge, I believe many people have more understanding of the wall demolition reform precautions, of course if you have better suggestions and ideas, please feel free to Consult Xiaobian.
[Aluminum Alloy Housing Solar Lights]
Different from other solar lamps with plastic housing. Lightweight but strong. Sandblasted and anodized metal housing,anti-oxidation and corrosion resistance. It can be used for many years even in extreme weather or harsh outdoor environments and maintain its performance. The lampshade is made of engineering plastic PC material, which is heat-resistant, anti-ultraviolet, and anti-yellowing.
[High Efficient Solar Panel]
PET solar panel with a larger lighting area, it can absorb sunlight faster, so that it can be recharged faster. Charging for 8 hours, can be illuminated for more than 12 hours.
[High-END LED For Bright Outdoor Lighting]
LED beads is not the more the better, the key is the lifespan and brightness.
[Microwave Radar Induction & Dawn To Dusk Lighting]
Radar motion sensor is a detector that combines microwave receiving and transmitting equipment. The working principle is based on the Doppler effect. The microwave wavelength is very short, between 1mm and 1000mm, so it is easily reflected by objects.The sensing angle is greater than 180°, and the farthest sensing distance can reach 32 feet.Ultra-long runtime on always on mode,up to 12H for dusk to dawn lighting.
[Four Working Modes & Waterproof]
Four working modes meet all your requirements for lighting.Mode:Faint light to strong light ;No light to strong light;Always lighting;Emergency lighting.You can set the mode arbitrarily.Waterproof,suitable for any outdoor scene: Garage, aisle, porch, patio, garden, deck, camping, yard, farm, fence, wall, etc.
Outdoor Solar Wall Lights,Aluminum Solar Wall Lights,Solar Motion Lights Outdoor,ALUMINUM ALLOY HOUSING Solar Light Shenzhen You&My Electronic Technology Co., Ltd , https://www.nbyoumysolarlight.com
