Laminate flooring to see environmental protection Look at the amount of formaldehyde released. This is the most critical issue in strengthening the floor. Under normal circumstances, the product inspection report "moisture" is relatively large, as the average consumer, it is difficult to see the problem, it is recommended that consumers look at physical goods, it is best to sell the factory's warehouse to see the new package of goods. If the place where the laminate flooring is laid smells the odor of formaldehyde, the product has generally exceeded the prescribed standard. Visually check the appearance quality. That is, the substrate, the structure of the wood fiber can be seen from the side slot of each board, and the finer the fiber, the better. Second, we must also see if there are obvious bubbling, uneven color, cracking and scratches. Feel free to remove a pack of flooring to see if there is a significant bend. Measure wear resistance. The degree of wear resistance does not need to be too high, 3000 rpm is enough for home use. Wear-resistant rotation is not a condition for determining high-quality flooring. Consumers can choose according to their economic strength and environment. Before purchasing or laying, consumers randomly sample a piece, sand it with sandpaper 180 times, and observe whether there is wear on the floor surface decoration layer pattern. Look at the moisture content. Try to choose a product with a smaller water-absorption thickness. Try to use well-known products. Should buy brands, manufacturers, site, model, specifications, grades and other packaging clearly identified products. Multi-layer solid wood floor to see the degree of integration between layers Look at the thickness of the surface layer. The difference in the price of flooring of the same specification depends mainly on the thickness of the surface wood. The thickness of the common multi-layer solid wood floor covering on the market is about 15 mm, and there are also 20 mm, but it is not as thick as possible. Consumers should try to choose products with a surface thickness of 12 mm. Observe the appearance of the floor. Whether the paint film is full and even, there are no signs of pin particles, indentations, and planing marks on the surface. Whether the surface of the material has defects such as decay, dead knot, wormhole, or crack, etc., whether the flaws and grooves around the surface are complete or not. Randomly extract a few pieces of floorboards to be assembled on the ground to see if there are obvious heads (gap) at the joints between the boards and whether the boards are flat. Solid wood floor materials Tree species selection. Choose wood flooring to choose wood species that have relatively stable wood properties and high hardness. It is best to choose imported dried products, and then choose color and wood grain. Material and size options. Many people think that the harder the wood, the better. In reality, the harder the wood, although it has better wear resistance, it is relatively poor in dimensional stability. Choose narrow and short in size as possible, although the laying effect is not as good as a long and wide floor, but the smaller the size, the smaller the deformation may be. Observe the appearance quality. Observe whether there are bugs on the surface of the floor (if not more than 1mm), cracking, decay, mildew, dead knots (but for small joints, color difference should not be too demanding, this is the natural properties of wood) and other defects. For the paint floor, it is also necessary to see whether the paint film on the surface of the lacquer board is even, plump, bright and clean, and whether there is any paint leakage, bubbling, perforation or pitting. Look at the moisture content. Try to choose flooring that is close to the local temperature and humidity. Nature Flooring Del Floor Paint Formaldehyde Decoration It is enough to look at these points when purchasing a detachable Container House! Detachable Container House,Prefab Modular House,Prefab Container Homes,Fabricated Container House Henan Jinming Metal Material Co., Ltd. , https://www.jinminghouse.com
There are still many types of detachable container house on the market, and in addition to being used on daily construction sites, many temporary buildings such as apartments, homestays, offices, schools, dormitories, and camps are also widely used. Its construction is convenient, the investment is low, and it can be used for a long time, and the cost performance is also really good. But there are many similar container houses on the market, how should we choose? In fact, it is enough to look at the following points when purchasing a high-quality container house.
Green is very important
The structure of the container house is simple, and it can also be disassembled. Even if it is only used for a short time, it can be installed again later, which will not cause waste of materials and will not generate construction waste. And you can freely splicing and DIY to create a lot of shapes, which is very good. It is an incomparable advantage of Folding Container House and Flat Pack Container House. When choosing a detachable container house, the roof can be made of solar panel materials, so that It can provide enough electric energy for the interior of the house, and can also achieve a good environmental protection effect.
Ease of use comparison
Compared with traditional concrete buildings, the construction of detachable container houses is really convenient. You only need to determine the specific dimensions and specifications, and then you can install them immediately. Moreover, the panels only need to be assembled in order. If it is a small container house, one or two workers can quickly complete the construction. Moreover, the boards of container houses are easy to transport. Even if the house has been built, it can be disassembled and transported directly in the later stage, and it is very convenient to use in different positions.
Cost-effective comparison
Since it is necessary to purchase a detachable container house, it is still necessary to measure the price. On the one hand, it is necessary to determine the quality of its materials and whether it can meet the standard of long-term use. On the other hand, it is also necessary to measure the price. Generally, manufacturers quote according to the specific size and area of the container house and the material of the color steel plate, so it is still necessary to make a comprehensive comparison, so that it is also very simple to choose a cost-effective container house.