Due to the low temperature in winter, the air is dry and there are many wind and sand. The paint we use is composed of many kinds of chemical materials. Under the low temperature condition in winter, the properties of chemical materials will change, which will cause some influence on paint construction. Therefore, the following matters should be noticed when home decoration construction paints: 1. Select low-moisture sheet, the general sheet moisture content should be below 12%, as far as possible below 10%. Buy a good plate to be well protected, do not cause moisture content increase caused by moisture, good condition before the construction of the drying treatment. Avoid whitening, cracking, etc. due to the moisture problem of the plate after renovation. 2. When using paints, pay attention to the difference between winter products and summer products. Due to the temperature difference, in order to facilitate the construction of the coating and improve the quality of the film, the products for summer use will be slower and the winter products will adjust slightly faster. Therefore, summer products should not be used in the winter, otherwise, they will suffer from paint film defects such as biting the bottom due to slow drying. 3. Should use the company's matching curing agent, thinner, otherwise it will cause poor film defects. 4. Strictly follow the ratio of the paint and curing agent provided on the label. Do not arbitrarily add less or more curing agent. Otherwise, it will cause defects such as biting or cracking. When equipped with paint, it should be stirred evenly, filtered with a 200 mesh filter cloth, and then defoamed after standing for 15 minutes. 5. Can not add driers and other chemical auxiliaries at will because of personal point of view, otherwise it will cause film defects such as cracking. 6. When the paint is applied, the construction temperature should not be less than 5 degrees Celsius and the humidity should not be greater than 85%. 7. It is forbidden for each layer to be dry and not properly polished, that is, it is easy to cause biting or falling off. 8. In winter, the temperature is low, the paint surface is dry for a long time, and the surface of the paint film is exposed to the outside air for a relatively long time. The dust particles in the air are likely to adhere to the surface of the paint film and form particles (more noticeable when the air is dry). Therefore, for better paint film effect, please pay attention to the cleanliness of the environment before painting. 9. It is forbidden to apply a thick coating once, otherwise it will cause defects such as biting, whitening, cracking, pinholes, and bubbles. 10. It is not advisable to store the paint for a long time. The longer the time, the more the gloss will decline. In winter decoration, painting or painting should pay attention to the construction process. Construction sequence: 1. Remove dust and dirt on the surface of wooden products and lines (wood base). 2. Trimming the burrs on the surface of the wood substrate, lifting the flaws, etc., and polishing with a sand leather to make the corners neat. 3. Use oily putty (or transparent putty) for scraping, polishing, refinishing putty, and polishing (when using varnish, make up for brown eyes first, Nail eyes, do some color repair work). 4. Apply the paint over the first pass, refill the putty, remove the surface dust after polishing. 5. Apply the second pass of the paint. After polishing, remove the surface dust and perform water milling with the sand skin to repair the hanging oil. 6. Apply the third pass of paint until the desired result is achieved. Paint Project Three Trees Paint Paint Paint Home Improvement
Roll-up tool bag is a type of tool bag that is designed to conveniently store and transport a collection of tools. It gets its name from its ability to roll up tightly, making it easy to pack and store when not in use.
The bag typically has multiple pockets or compartments of varying sizes to accommodate a range of tools. It may also feature straps or loops to secure larger items in place.
Roll-up tool bags are often made of durable materials like canvas or nylon to withstand the wear and tear of regular use. They are popular among professionals and DIY enthusiasts alike for their portability and organization.
Some of the advantages of using a roll-up tool bag include:
Portability: Roll-up tool bags are lightweight and easy to transport, making them a great choice for those who need to bring their tools with them on the go.
Organization: With multiple compartments and pockets, a roll-up tool bag makes it easy to keep your tools organized and easily accessible.
Space-saving: When not in use, a roll-up tool bag can be rolled up tightly and stored in a small space, making it a great option for those with limited storage space.
Durability: Roll-up tool bags are often made of durable materials that can withstand regular use and the wear and tear of being transported from place to place.
Roll-Up Tool Bag,Roll Up Tool Pouch,Roll Up Tool Bag,Roll Up Bag For Tools ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.sjxiangletoolbag.com
Master paint Ou Long paint
Link: Declined to be fooled! After 80 pay attention to the three traps of decoration
