The Guangdong Provincial Quality Supervision Bureau reported on the 23rd that 10 products are regularly supervised and inspected for their quality status, of which the qualified rate of sampling batches of wood-based panel products is 74.0%. A total of 373 batches of wood-based panel products produced by 278 companies in 16 cities, including Guangzhou, Shenzhen, and Foshan, were inspected this time, and 276 batches were qualified. The unqualified items are mainly: water absorption thickness expansion rate, static bending strength, formaldehyde The amount of release. The water absorption thickness expansion rate reflects the product's ability to resist moisture deformation, the smaller the value, the better. If the board with poor water resistance is not tightly sealed in the humid environment, it may expand significantly, causing changes in size and strength, which will affect the use of artificial board products. The main reasons for the failure of the project: First, the product design and production process of some enterprises are unreasonable; Second, some enterprises use cheap and low-quality raw materials to reduce costs. The spot check found that 35 batches of the project failed. The failure of the static bending strength item indicates that the product does not have sufficient bending strength and will undergo large deformation after being subjected to bending, which will affect the performance of the artificial board products, especially the load-bearing components. This item is not qualified for 26 batches of products. The main reasons for the failure of the project: First, some companies use cheap and low-quality raw materials to reduce costs; Second, some companies are not equipped with the necessary inspection equipment, do not have the ability to self-inspection, and do not entrust relevant testing agencies to test. Formaldehyde is a quality indicator related to human health and life safety. There are 17 batches of products that failed the project. The main reasons leading to the failure of the project: First, some companies use inferior adhesives with high free formaldehyde; Second, some companies have adopted unreasonable sizing process and hot pressing process, which caused the failure to fully react and solidify. A large amount of free formaldehyde in the board is released during use; the third is that some enterprises have not taken proper post-treatment process after producing the board. Xuwen County Yihua Forest Co., Ltd. 1. Formaldehyde emission (mg / L) 25.6mg / L Zhanjiang Mazhang District Taiping Guansen Wood Products Factory 1. Formaldehyde emission (mg / L) 13.8mg / L Dongguan Guangfa Plywood Co., Ltd. 1. Formaldehyde emission (mg / L) 9.6mg / L Guangzhou Lixinya Decoration Material Co., Ltd. August 1, 2010 1. Water absorption thickness expansion rate 2. Internal bonding strength 3. Formaldehyde emission 9.4mg / L Foshan Nanhai District Hechuang Xingjiang Star Bend Wood Factory 1. Formaldehyde emission 9.6 Jialing Dongjiang Wood Industry Co., Ltd. 1. Internal bonding strength; 2. Surface bonding strength; 3.2h water absorption thickness expansion rate; 4. Formaldehyde release amount 48.9 Dongguan Rongfeng Wood Industry Co., Ltd. 1. Formaldehyde emission (mg / L) 8.2mg / L Huizhou Huidamei Decorative Board Co., Ltd. 1. Formaldehyde emission 8.1 Foshan Xiqiao Jinxuanju Furniture Factory 1. Formaldehyde emission 7.7 Foshan Shunde Lecong Jinlong Sticker Factory 1. Water absorption thickness expansion rate; 2. Formaldehyde emission 7.7 Huizhou Huidamei Decorative Board Co., Ltd. 1. Water absorption thickness expansion rate; 2. Formaldehyde emission 7.2 Foshan Xiqiao Jinxuanju Furniture Factory 1. Formaldehyde emission amount 7.0 Foshan Xiqiao Yutian Plywood Factory 1. Formaldehyde emission amount 7.0 Foshan Nanhai Yiwei Decorative Panel Co., Ltd. 1. Water absorption thickness expansion rate; 2. Formaldehyde release amount 4.1 Dongguan Senfeng Wood Industry Co., Ltd. 1. Water absorption thickness expansion rate (%) 2. Formaldehyde emission (mg / 100g) 33.1mg / 100g Lianjiang Huasen Wood Industry Co., Ltd. 1. Formaldehyde emission (mg / 100g) 33.1mg / 100g Guangzhou Panyu District Shawan Xiongfeng Wood Flooring Factory 1. Dimensional tolerance 2. Dimensional tolerance 3. Dimensional tolerance 4. Surface wear resistance 5. Formaldehyde emission 1.7mg / L Guangzhou Tianhe Daguan Xinjunya Wood Product Factory 1. Dimensional tolerance 2. Dimensional tolerance 3. Wear-resistant surface Guangzhou Jiasheng Wood Industry Co., Ltd. 1. Dimensional tolerance 2. Wear-resistant surface Foshan Yachen Furniture Co., Ltd. 1. Internal bonding strength; 2. Water absorption thickness expansion rate Jiaoling Guangfu Plywood Factory 1. Moisture content; 2. Adhesive strength; 3. Elastic modulus Pingyuan County Hongxing Wood Products Co., Ltd. 1. Static bending strength; 2. Internal bonding strength; 3. Surface bonding strength; 4.2h water absorption thickness expansion rate Hongwei Wood (Renhua) Co., Ltd. 1. Internal bonding strength; 2.2h water absorption thickness expansion rate; 3. Static bending strength Foshan Chancheng Hengxing Furniture Processing Decoration Factory 1. Screw holding force Foshan Chancheng Lingyue Sticker Panel Processing Factory 1. Surface bonding strength Foshan Chancheng Lingyue Sticker Panel Processing Factory 1.2h water absorption thickness expansion rate Foshan Nanhai Dachang Board Co., Ltd. 1.2h water absorption thickness expansion rate Tianlong Wood Industry Co., Ltd. 1.2h water absorption thickness expansion rate Tianlong Wood Industry Co., Ltd. 1.2h water absorption thickness expansion rate Foshan Yike Furniture Co., Ltd. 1.2h water absorption thickness expansion rate Lianzhou Jisen Wood Industry Co., Ltd. 1.2h water absorption thickness expansion rate Guangdong Shixing Huazhou Artificial Board Factory 1.2h water absorption thickness expansion rate Hongwei Wood (Renhua) Co., Ltd. 1.2h water absorption thickness expansion rate Foshan Shunde Beijiao Zonghao Plate Decoration Factory 1.2h water absorption thickness expansion rate Foshan Shunde Lecong Shuiteng Huilong Particleboard Factory 1.2h water absorption thickness expansion rate Foshan Shunde Lecong Shuiteng Huilong Particleboard Factory 1.2h water absorption thickness expansion rate Foshan Nanhai Dachang Board Co., Ltd. 1. Static bending strength Foshan Nanhai District Lishui Yongying Wood Industry Co., Ltd. 1. Static bending strength Foshan Pengbang Wood Manufacturing Co., Ltd. 1. Surface wear resistance Dongyuan County Fenghua Forestry Development Co., Ltd. Particleboard Factory 1. Static bending strength Pingyuan Yuanfeng Wood Co., Ltd. 1. Internal bonding strength; 2. Surface bonding strength Lianzhou Jisen Wood Industry Co., Ltd. 1. Static bending strength Foshan Shunde Beijiao Zonghao Plate Decoration Factory 1. Static bending strength Foshan Shunde Juxiong Wood Industry Co., Ltd. 1. Static bending strength Fenglin Decoration Furniture Factory, Lecong Town, Shunde District, Foshan City 1. Internal bonding strength Foshan Shunde Lunjiaoqunan Wood Products Factory 1. The surface of the paint board is wear-resistant Foshan Shunde Tangshi Wood Industry Co., Ltd. 1. Processing accuracy (length); 2. Tree species Zhongshan Jindao Wood Products Co., Ltd. 1. The surface of the paint board is wear-resistant Zhongshan Jindao Wood Products Co., Ltd. 1. Surface wear resistance Zhongshan Xiangxing Electronics Co., Ltd. 1. Tree species Dongguan Shenlong Decoration Materials Co., Ltd. 1. Water absorption thickness expansion rate (%) Dongguan Zhengda Wood Industry Co., Ltd. 1. Static bending strength (Mpa) Dongguan Huangjiang Guangxing Wood Product Factory 1. Water absorption thickness expansion rate (%) Dongguan Houjie Hechang Sheet Processing Factory 1. Water absorption thickness expansion rate (%) Dongguan Guli Wood Co., Ltd. 1. Screw holding force (thickness ≥16mm) [N] Dongguan Senfeng Wood Industry Co., Ltd. 1. Water absorption thickness expansion rate (%) 2. Surface bonding strength (Mpa) 3. Static bending strength (Mpa) Dongguan Mayong Guangjian Woodware Processing Factory 1. Size deviation (mm) Lianjiang Yinglin Artificial Board Co., Ltd. 1. Density deviation (%) 2. 2h water absorption thickness expansion rate (%) 3. Internal bonding strength (Mpa) 4. Surface bonding strength (Mpa) 5. Static bending strength (Mpa) 6. Elastic modulus (Mpa) Zhanjiang Fushan Wood Industry Co., Ltd. 1. Moisture content (%) 2. Adhesive strength 3. Static bending strength (Mpa) 4. Elastic modulus (Mpa) Leizhou Fulin Wood Co., Ltd. 1. 2h water absorption thickness expansion rate (%) 2. Static bending strength (Mpa) 3. Elastic modulus (Mpa) Lianjiang Yasen Wood-based Panel Co., Ltd. 1. Internal bonding strength (Mpa) 2. Surface bonding strength (Mpa) 3. Static bending strength (Mpa) 4. Elastic modulus (Mpa) Suixi Jingshun Plywood Co., Ltd. 1. Moisture content (%) 2. Adhesive strength 3. Elastic modulus (Mpa) Zhanjiang Senhe Artificial Board Co., Ltd. 1. Surface bonding strength (Mpa) Suixi Mingda Board Industry Co., Ltd. 1. Internal bonding strength (Mpa) 2. Surface bonding strength (Mpa) 3. Static bending strength (Mpa) 4. Screw holding force (thickness ≥ 16mm) [N] Suixi County Changsheng Wood Products Co., Ltd. 1. Moisture content (%) 2. Adhesive strength 3. Static bending strength (Mpa) 4. Elastic modulus (Mpa) Dongguan Xingchang Wood Industry Co., Ltd. 1. Size deviation (mm) Deqing County Mocun Town Lisheng Plywood Factory 1. Adhesive strength 2. Static bending strength (Mpa) 3. Elastic modulus (Mpa) Zhaoqing Duanzhou District Baijia Plywood Factory 1. Adhesive strength 2. Static bending strength (Mpa) 3. Elastic modulus (Mpa) Deqing Kanghui Wood Industry Co., Ltd. 1. Moisture content (%) 2. Adhesive strength 3. Static bending strength (Mpa) 4. Elastic modulus (Mpa) Fengkai Xiangxiang Wood Industry Co., Ltd. 1. Adhesive strength 2. Static bending strength (Mpa) 3. Elastic modulus (Mpa) Sihui Huilong Wood Industry Co., Ltd. 1. Water absorption thickness expansion rate (%) Deqing County Desen Wood Industry Co., Ltd. 1. Adhesive strength Yangjiang Wulian Artificial Board Co., Ltd. 1. Internal bonding strength (Mpa) Yangchun Weilibang Wood Industry Co., Ltd. 1. Water absorption thickness expansion rate (%) Yangchun Weilibang Wood Industry Co., Ltd. 1. Water absorption thickness expansion rate (%) Dongguan Shatian Meiyaofeng Sticker Factory 1. Static bending strength (Mpa) 2. Surface wear resistance Dongguan Shatian Guanfeng Decorative Veneer Factory 1. Water absorption thickness expansion rate (%) 2. Surface bonding strength (Mpa) Dongguan Hongmei Saiweina Flooring Factory 1. Surface scratch resistance Dongguan Jiewei Decoration Materials Co., Ltd. 1. Surface bonding strength (Mpa) Guangzhou Xiangzhilin Decoration Materials Co., Ltd. Water absorption thickness expansion rate Guangzhou Shangxing Artificial Board Co., Ltd. 1. Internal bonding strength 2. Surface bond strength Guangzhou Huafangzhou Wood Industry Co., Ltd. 1. Static bending strength 2. Internal bonding strength Guangzhou Yate Office Furniture Co., Ltd. 1. Static bending strength 2. Internal bonding strength 3. Water absorption thickness expansion rate Guangzhou Rongye Decorative Veneer Sheet Co., Ltd. 1. Internal bonding strength 2. Water absorption thickness expansion rate Guangzhou Panyu District Shawan Guangli Wood Products Factory Glue strength Guangzhou Weijun Wood Products Co., Ltd. 1. Surface bond strength 2.2h water absorption thickness expansion rate Guangzhou Baiyun District Liangtian Xiangji Decorative Board Factory Internal bond strength Guangzhou Tianhe Daguan Xinjunya Wood Product Factory Paint plate surface wear-resistant Guangzhou Panyu District Shawan Xiongfeng Wood Flooring Factory 1. Specification size and deviation 2. The surface of the paint board is wear-resistant Guangzhou Danfeng Wood Products Co., Ltd. Elastic Modulus Guangzhou Yangxin Wood Industry Co., Ltd. Glue strength Guangzhou Yijian Wood Industry Co., Ltd. Water content Quanfa Wood Products (Shenzhen) Co., Ltd. 1. Specification and deviation 2. Wear resistance of the surface of the painted board Shenzhen Madeland Environmental Technology Co., Ltd. 1. Static bending strength 2. Surface wear resistance Shenzhen Yuexin Plate Co., Ltd. 1. Static bending strength 2, 2h water absorption thickness expansion rate Quanfa Wood Products (Shenzhen) Co., Ltd. Paint plate surface wear-resistant Shenzhen Madeland Environmental Technology Co., Ltd. Static bending strength 2010 Guangdong Province Wood-based Panel Product Quality Regular Supervision and Inspection of Poor Quality Products and List of Manufacturers Serial number Production company name ( Nominal ) product name trademark model specification Production date or batch number Unqualified items Name of inspection agency 1 Xuwen County Yihua Forest Co., Ltd. Plywood —— 1220mm × 2440mm × 9mm 2010-08-02 1. Formaldehyde emission (mg / L) 25.6mg / L Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 2 Zhanjiang Mazhang District Taiping Guansen Wood Products Factory Plywood —— 400mm × 400mm 2010-08 1. Formaldehyde emission (mg / L) 13.8mg / L Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 3 Dongguan Guangfa Plywood Co., Ltd. Plywood —— —— Narrow Belleville Washers,Belleville Disc Spring Washers,Stainless steel Beleville Washers Ningbo Yinzhou Zhenhua Stamping Co., Ltd. , https://www.fastenersstamping.com Serial number Production company name (Nominal) product name trademark Model specifications Production date or batch number Unqualified items Name of inspection agency 1 Plywood —— 1220mm × 2440mm × 9mm 2010-08-02 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 2 Plywood —— 400mm × 400mm 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 3 Plywood —— —— —— Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 4 Impregnated film paper facing artificial board (medium density fiberboard) Riya 1220mm × 2440mm × 18mm Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 5 Plywood —— 450mm × 450mm × 9mm E2 August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 6 Chipboard —— 2440mm × 1220mm × 16mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 7 Decorative veneer veneer —— 3mm 2010-07 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 8 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 4.8mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 9 Plywood —— 1000mm × 450mm × 9mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 10 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 4mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 11 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 2.85mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 12 Plywood —— 1000mm × 450mm × 18mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 13 Plywood —— 1830mm × 915mm × 17mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 14 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 3.9mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 15 MDF —— 1220mm × 2440mm × 12mm 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 16 MDF —— 800mm × 800mm × 12mm 2010-08-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 17 Parquet Xiongfeng 910mm × 125mm × 15mm June 30, 2010 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 18 Parquet Yaheng 910mm × 125mm × 15mm May 22, 2010 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 19 Parquet Uighur 910mm × 125mm × 12mm June 20, 2010 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 20 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 15mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) twenty one Plywood for concrete formwork —— 1830mm × 915mm × 17mm August 30, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) twenty two Chipboard —— 2440mm × 1220mm × 15mm August 30, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) twenty three Chipboard Hongwei 1830mm × 2440mm × 18mm July 30, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) twenty four Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 16mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 25 Impregnated film paper veneer artificial board Ling Yue 1220mm × 2440mm × 4.5mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 26 Impregnated film paper veneer artificial board Ling Yue 1220mm × 2440mm × 15.5mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 27 Chipboard —— 2440mm × 1220mm × 15mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 28 Chipboard Jin Huilong 1220mm × 2440mm × 25mm June 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 29 Chipboard Jin Huilong 1220mm × 2440mm × 16mm June 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 30 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 15.5mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 31 Chipboard Lushuihe 1220mm × 2440mm × 18mm September 01, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 32 Chipboard Huafangzhou 1220mm × 2440mm × 18mm September 05, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 33 Chipboard Hongwei 1525mm × 2440mm × 15mm August 27, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 34 Impregnated film paper veneer artificial board (chipboard) —— 1220mm × 2440mm × 15mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 35 Chipboard Jin Huilong 1220mm × 2440mm × 18mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 36 Chipboard Jin Huilong 1220mm × 2440mm × 16mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 37 Chipboard —— 2440mm × 1220mm × 18mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 38 Impregnated film paper veneer artificial board Bravery 2440mm × 1220mm × 18mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 39 Parquet —— 910mm × 127mm × 15mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 40 Chipboard —— 1220mm × 2440mm × 14mm August 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 41 Chipboard —— 2440mm × 1220mm × 9mm August 27, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 42 Chipboard Lushuihe 1220mm × 2440mm × 16mm September 01, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 43 Impregnated film paper veneer artificial board (MDF) —— 1220mm × 2440mm × 12mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 44 Chipboard —— 1220mm × 2440mm × 18mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 45 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 12mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 46 wooden floor Accor 18mm × 95mm × 610mm June 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 47 Solid wood floor (fallen beans) Tang Dynasty 460mm × 95mm × 18mm August 20, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 48 Solid wood flooring (tree species: winged bean common name: Longfeng Tan) New Oasis 610mm × 125mm × 18mm August 06, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 49 Parquet New Oasis 910mm × 125mm × 15mm August 18, 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 50 Solid wood flooring (tree species: Australian card) —— 510mm × 123mm × 17.5mm July 2010 National Furniture Product Quality Supervision and Inspection Center (Guangdong) 51 Impregnated film paper veneer artificial board —— 18mm 2440mmx1220mm 2010-07-23 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 52 Chipboard —— 15mm 2440mmx1220 mm 2010-08-05 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 53 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 15mm 2010 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 54 Impregnated film paper veneer artificial board Jixiang 1220mmx2440mmx5.0mm 2010-05-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 55 Chipboard —— 1220mm × 2440mm × 18mm 2010-08-11 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 56 MDF —— Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 57 wooden floor Rainbow light 610mm × 65mm × 17.8mm 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 58 Bagasse particle board —— 600mm × 600mm × 7mm 2010-08-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 59 Plywood for concrete formwork —— 500mm × 500mm 2010-08-05 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 60 Bagasse particle board —— (1220 × 2440 × 9) mm 2010-08-03 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 61 Chipboard —— 600mm × 600mm × 11mm 2010-08-04 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 62 Building template —— 500 × 500 × 16 (mm) 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 63 MDF Mori Wo 800mm × 800mm × 15mm 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 64 Sugarcane chipboard —— 600mm × 600mm × 16mm 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 65 Plywood for concrete formwork —— 500 × 500 × 17 (mm) 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 66 Parquet Hengchang 810mm × 129mm × 15.3mm 2010-07-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 67 Plywood —— 16mm 2010-08-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 68 Plywood for concrete formwork —— 17mm 2010-08-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 69 Plywood for concrete formwork —— 500mm × 500mm—block 2010-08-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 70 Plywood for concrete formwork Xiangxing 500mm × 500mm—block 2010-08-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 71 MDF —— 800mm × 800mm—block 15mm 2010-08-05 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 72 Plywood for concrete formwork —— 500mm × 500mm—block 2010-08-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 73 MDF Yuelong 800mm × 800mm × 12mm 2010-07-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 74 MDF Willibang 800mm × 800mm × 15mm 2010-08-10 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 75 MDF Willibang 800mm × 800mm × 9mm 2010-07-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 76 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 15mm 2010-08-17 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 77 Impregnated film paper veneer artificial board —— 1220mm × 2440mm × 5mm 2010-08-16 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 78 Impregnated paper laminate wood flooring Savina (1219 × 197 × 8.3) mm 2010-08-17 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 79 Impregnated film paper veneer artificial board —— 1220mm × 2440mm 2010-08 Guangdong Quality Supervision Furniture Inspection Station (Dongguan) 80 Impregnated film paper veneer artificial board (shavings) Pron 1220mm × 2440mm × 18mm May 16, 2010 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 81 Chipboard —— 1220mm × 2440mm × 15mm 2010.7.26 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 82 Impregnated film paper facing artificial board (medium density fiberboard) Huafangzhou 1220mm × 2440mm × 18mm 2010.7.26 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 83 Impregnated film paper facing artificial board (medium density fiberboard) —— 1220mm × 2440mm × 18mm 2010.7.23 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 84 Impregnated film paper facing artificial board (medium density fiberboard) Rongye 1220mm × 2440mm × 9mm 2010.7.5 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 85 Plywood (Class II) —— 1220mm × 2440mm × 12mm 2010.7.12 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 86 Chipboard —— 1220mm × 2440mm × 14mm 2010.7.21 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 87 Impregnated film paper veneer artificial board (shavings) —— 1220mm × 2440mm × 16mm 2010.8.1 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 88 Solid wood flooring (oak) Yaheng 610mm × 125mm × 18mm 2010.7.25 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 89 Solid wood floor (iron wire) Xiongfeng 305mm × 77mm × 18mm 2010.6.30 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 90 Parquet Maple leaf 910mm × 125mm × 15mm 2010.7.5 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 91 Plywood (Class III) —— 1220mm × 2440mm × 5mm July 2010 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 92 Plywood (Class III) YJ Senbao 1220mm × 2440mm × 9mm July 2010 Guangdong Quality Supervision Inspection Station for Wood and Wood Products 93 Jatoba twin leaves hematoxylin wood floor Coffey 610mm × 125mm × 18mm × 16P qualified product 2010.04.18 Shenzhen Institute of Metrology and Quality Inspection 94 Madeline negative ion wood floor (youth years) MDN Madeleine 207 # 808 * 145 * 12mm 20 qualified products 2010.07.03 Shenzhen Institute of Metrology and Quality Inspection 95 Chipboard —— 2440mm × 1220mm × 15mm first class 2010.03. Shenzhen Institute of Metrology and Quality Inspection 96 Longfeng Sandalwood Wing Bean (CUMARU) Coffey Wood Floor Coffey 610mm × 125mm × 18mm × 16P qualified product 2010.01.18 Shenzhen Institute of Metrology and Quality Inspection 97 Madeira negative ion wooden floor (romantic full house) MDN Madeleine 8985 # 807 * 127 * 12mm 20 qualified products 2009.09.29 Shenzhen Institute of Metrology and Quality Inspection Belleville Washer NFE 25-511 S