After the big face is checked, the details are checked. The construction unit of each house is different, and the quality and design are also different. The professionalism of supervision plays a very obvious role in these aspects. The details are very important. Many places are invisible to us, or there may be problems with the decoration of furniture in the later period. Doors and windows 2, check the function of the window 2, check each light switch and power outlet can be used normally, with a mobile phone charger, or electric pen plug to check whether the power outlet power, of course, professionals will use a dedicated socket check. Gas line Waterproof Special reminder: In general, the drainage pipes in the lower part of the bathtub have return traps, while other locations do not, and it is necessary to install deodorant drains! ! ! Tip: Equipotential protection devices are mainly used for leakage protection in relatively humid environments such as kitchens and bathrooms. Metal racks, such as wash basins, have stainless steel sewer pipes. They are connected to a stainless steel pipe and are connected to a box with a wire (not less than 4 square feet) to prevent leakage due to moisture. Protective effects. In the high-end decoration are mandatory, almost everyone in the home improvement did not notice this point, and then there is a nut under the cast iron bathtub, but also for the wiring here, so the equipotential box should not be sealed. Entrance decoration children's room decoration window plug switch cement house decoration glass furniture glass door toilet door kitchen glass sliding door bathroom door bathroom wash basin overall bathroom toilet design bathroom waterproof bathroom leak aluminium sliding windows,upvc sliding windows,sliding window installation,sliding windows bunnings SMIRO DOORS AND WINDOWS CO., LTD , https://www.smirowindows.com
1, check the strength of doors and windows
b. hardware accessories: complete, correct location, strong
c. Sealing quality: When the doors and windows are closed, there are no obvious gaps between the fan and the frame. The seals are not loose and do not fall off.
d. Door and window frame, fan vertical, not bent
e. The glass is non-pollution, no damage, no dust and moisture in the double glass sandwich, and the separator is even.
f. Whether the window drain hole has been opened. Unopened water will flow into the profile.
Circuits
1. Check whether the sockets and switches are set properly. Whether the circuit needs to be remodeled in the decoration. First, look at the individual needs. Second, see if the socket and switch settings in the house are reasonable and convenient to use.
waterway
The waterway is mainly reflected in the kitchen and bathroom. The general situation in the bathroom is 2 floor drains, a toilet water pipe, a bathtub water pipe, a sink basin, see if the setting is reasonable, and then according to the needs of their own decoration to decide whether to change, but the specific transformation program To listen to experts' opinions.
The most problematic problem is that many people want to change the toilet's sewers and have gained more space. However, rebuilding the toilet water pipes needs to be reconstructed at the sewer pipe road at the top of the downstairs, which can easily cause a lot of trouble. It is difficult for the owners in the downstairs to agree to make such changes. Therefore, it is not advisable to change them by yourself (using the method of raising the ground is prone to poor drainage). Listen to the opinions of professionals.
The gas meter is a small thing that occupies space. How to adjust the position of this watch must also listen to the opinions of professionals. It must be transformed by the gas company. It is very important.
The waterproof mentioned here refers to the waterproof of the kitchen and toilet. Of course, some of the houses that are currently delivered have already declared that they have not done waterproofing. This requires renovation. If waterproofing is already done at the time of delivery, we have to verify whether the waterproofing is done well. If you don't try it before the renovation, then if you find something leaking when you finish it, then the maintenance project will be big. You have to remove the floor that has been renovated to make a new waterproof layer.
Acceptance of the waterproof method is: use a cement mortar to make a gong to block the toilet door, and then take a plastic bag covering the sewage / outlet, and then tied, and then put the water in the toilet, shallow on the line (greater than 2cm) . Then, about 24 hours after the property and owner downstairs, check if there is any leakage in the ceiling of their home toilet.
Inspection pipeline
The pipe referred to here refers to a drainage/pollution pipe. Utah is a sewage outlet such as a balcony. When it is accepted, take a water-filled appliance in advance and pour water into the outlet. See if the water is flowing smoothly. Why do you want to accept this? Because during construction, some workers often “stolen†this work when cleaning. Put some cement residue into the drain and run away. If the cement is more viscous, it will clog at the elbow and cause drainage difficulties. There is another situation, but it is not related to acceptance. That is to look at whether the sewage pipe has water storage deodorant elbow. According to experience, if the sewage pipe does not contain water and deodorant elbow, then the overall quality of the house will have to hit 12 points. Why do the sewage pipes need such elbows, because the elbows will store water so that the smell from the lower pipes will be blocked under this layer. Without an elbow, the laundry outlets and toilet drains emit a odor. There may be developers who think that the use of deodorant floor drains will work. The practice of the project proves that deodorant floor drains are far from meeting actual needs. And because of this small place, it is often best to reflect the construction quality of the builders.
Checking details
Aluminum single -hanging window is a window type made of aluminum alloy material. The following are some introductions about it:
1. Structural characteristics:
-Forest frame: Made of aluminum alloy material, has high strength and stability, and can withstand greater weight and wind. The design of the window frame is usually relatively concise to achieve narrow -edge effects and maximize the lighting area and field of vision.
-Fan fan: Generally, there is only one fan fan. It can be connected to the window frame through the hinge or other connection devices to open out or inward. The size of a single -hanging window is relatively small to facilitate operation and control.
-The hardware accessories: including clubs, handles, locks, etc. The quality of these hardware accessories directly affects the performance and safety of the window. High -quality hardware accessories can ensure that the windows are opened and closed smoothly, and they have good anti -theft function.
2. Performance advantages:
-Beve sealing: Aluminum single -hanging windows usually use sealing materials or sealing wool strips such as sealing materials, which can effectively prevent the penetration of air, rain and dust, and improve the indoor insulation, heat insulation and sound insulation effects.
-Opered corrosion resistance: The material of aluminum alloy has good corrosion resistance, not easy to rust and corrosion, and can be used for a long time in various harsh environments. Even in high corrosive environments such as humidity, rain, or coastal areas, aluminum single -hanging windows can maintain good appearance and performance.
-The higher strength and hardness: The strength and hardness of aluminum alloy materials are high, and can withstand large external force impacts, and it is not easy to deform and damage. This makes aluminum single -hanging windows have good safety and stability, and can effectively protect the safety of indoor personnel and property.
3. Application scenario:
-Residential building: suitable for various residential buildings, such as villas, apartments, ordinary houses, etc. It can be installed in different rooms such as bedrooms, living rooms, kitchens, and bathrooms to meet different lighting and ventilation needs.
-A commercial buildings: There are also widely used applications in commercial buildings, such as office buildings, shopping malls, hotels, etc. It can be used as an outer wall window or indoor partition window to provide good lighting and vision for business space.
-Ex Industrial Building: In some industrial buildings, such as factory buildings, warehouses, etc., aluminum single -hanging windows can also be used as a window for ventilation and lighting. Because it has good corrosion resistance and strength, it can meet the requirements of the industrial environment.