Acceptance specifications for the acceptance of ceilings for plasterboard and wooden plywood are as follows: (1) Guarantee items The material, type, specification and ceiling structure of the cover panel and its fixing method must meet the design requirements and relevant national standards. The installation of light steel keel or wood dragon skeleton must comply with the relevant provisions of Chapter II of this standard. Wooden keel, plywood must be fire-retardant treatment in accordance with the relevant regulations. The connection between the cover panel and the keel must be tight and firm. The position of the equipment mouth and lighting fixtures must be symmetrical according to the plates, and the layout is reasonable; the edges of the openings are neat, and the mouth guards are tightly closed. The arrangement is straight, neat and beautiful. Inspection method: observation, ruler measurement, hand check (2) Basic items The surface quality of the cover panel should meet the following requirements: Qualified: smooth surface, correct arching, uniform color, clean, no pollution, no back rust, pitting, hammer marks, no exposed nail caps. Excellent: smooth surface, accurate arching, uniform color, clean, no pollution, no back rust, pitting, hammer marks, self-tapping screws arranged evenly, no exposed nail cap, no cracking. The quality of seams and beadings of the cover panel shall comply with the following provisions: Qualified: The seams are even and narrow on the keel, the fillets are straight, there is no warping, smooth and smooth, the joints are tight and there is no leakage. Yin Yang corner side Founder. Excellent: The seams are evenly distributed on the keel, the fillets are straight, the width is uniform, there is no warping, smoothness, smoothness, tight seams, no leaks, and the yin and yang corners are squared off. Shaped requirements should meet the following requirements: Qualified: The size and position of the shape are correct, and the closing is tight and smooth. Excellent: The size and position of the model are accurate, the closing is smooth, the curve is smooth and beautiful. Inspection methods: observation, ruler check. Decoration experience ceiling installation
Flap Disc Plastic Backing Pad are made of Nylon and special glass fiber mixed together, high quality of the raw material used, this makes our backing pads meet all European safety regulations.
The related abrasive products we can supply is Flap Disc Adhesive , Bonded Abrasives , and Buffing And Polishing products, such as Cotton Buffing Wheels and Sanding Sponge , if you have any needs about abrasive tools, please kindly feel free to contact us.
Plastic Backing Pad,Nylon backing pad for flap disc,107 plastic backing pad,Flap Disc Nylon Backing Pad,Blue Color Flap Disc Backing Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com
The plastic backing pad are perfect for producers of Abrasive Flap Disc for the professional field. Plastic backing pads are more widely used due to their conformability. Durable plastic backing pad allows easy trimming for custom operations, which allows more use of the flaps, especially for blending and finishing. Plastic Backing Pads will not leave any abrasive wear on the workpiece. The max speed can be around 22000-23000RMP
Good features
Premium raw material used Light- weight, Long tool life.Excellent heat dissipation.High tensile strength.fully respectful of all European safety regulations
Plastic Backing Pads are made of Nylon mixed together with special glass fiber. Plastic backing pads are more widely used due to their conformability. Durable plastic backing pad allows easy trimming for custom operations, which allows more use of the flaps, especially for blending and finishing. Plastic Backing Pads will not leave any abrasive wear on the workpiece.
