1. Under normal use, the bag type coarse filter should be replaced once every 7 to 9 weeks, and if it is a sub-high filter, it needs to be replaced in 5 to 6 months. Second, when assembling the horizontal screw centrifuge, it is not allowed to open the package. When handling, pay attention to light and light protection. It is strictly forbidden to have a violent impact. 3. If the corrugated board is used for vertical assembly of the decanter centrifuge, then the corrugated board must be vertically on the ground, and the connection between the vertical direction and the frame is not allowed to be deformed or broken. After that, it is necessary to ensure that the inner wall of the pipe is free of impurities such as oil and floating dust. Fourth, every 1-2 months need to replace the filter material for cleaning, you can add detergent in the water, then put the filter material into the soaking, then rinse and finally dry it, you can replace it again, but after flushing up to two times In order to ensure the effect of the filter, it still needs to be replaced with a new one. Concerned about surprises Label: How to effectively and conveniently maintain the horizontal screw centrifuge Previous: Dust collector is difficult to block the solution Next: What are the requirements for air compressor repair and maintenance? Plastic Optic Fiber Patch Cord
The plastic optic fiber Patch Cord is low attenuation, no heat, flexible, widely use in different purpose. We have different purpose and different function pacth cord. All of the products has CE, ROHS, Reach certificate. Our workshop area more 10000sqm, and we have professional R&D.
The patch cable connects with two connector. This is for different purpose, to [patch" a signal from one side, switch, or router to another side, switch, or router. Use patch cables to carry a variety of signals, such as: ethenet, telephone, and other industrial area. fiber optic equipment,fiber optic patch cord,fiber patch cord Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelight.com