No matter what type of fan has problems in use, it is inevitable to disassemble it. However, some users do not care about the disassembly and assembly of the Reitz fan, which causes the Reitz fan to appear frequently after being assembled. problem. Mutrade car parking tower, ATP series are a type of automatic tower parking system, that is made of a steel structure and can store 20 to 70 cars at multilevel parking racks by using high speed lifting system, to extremely maximize the usage of limited land in downtown and simplify the experience of car parking. By swiping IC card or inputting the space number on operation panel, as well as shared with information of parking management system, the desired platform will move to entrance level of the parking tower automatically and quickly. Up And Down Cross Moving Type,Up Cross Moving Type,Down Cross Moving Type,Up Down Cross Moving Type Taiyaun JDS Machinery And Equipment Co., Ltd. , https://www.jdsmachine.com
No matter what type of fan has problems in use, it is inevitable to disassemble it. However, some users do not care about the disassembly and assembly of the Reitz fan, which causes the Reitz fan to appear frequently after being assembled. The problem, if we want to solve these problems, we can only disassemble the fan again, which not only affects the use of the fan, but also affects the quality of the fan assembly. Therefore, if the fan is disassembled, it is necessary to ensure the effective assembly of the fan. Sex. According to the reflection of the “target=_blank> electromechanical technology users of Dongguan Ruitian Electromechanical, the reason why the fan will have various problems after assembly is that the key points in the disassembly have not been taken seriously.
First of all, before the disassembly, the label on each part of the Reitz fan should be reprinted again. Otherwise, the parameters on the part can not be read when the disassembly is broken, which will affect the user's judgment on the fan. For some need to print without printing The parts must be printed to facilitate the assembly of the fashion back to the original position. The parts that need to be printed include parts that do not have the wrong position or orientation and influence the balance, such as keys, covers, bushings and their backing rings, couplings and their pins, inlets and axial flows of the Reitz centrifugal fan. Detachable blades of the fan, etc. The second is the lubricant of the fan. We must first drain and filter the lubricant before it is cooled, and then disconnect the flange connecting the tubing to the body. These two points are all work that must be done before disassembly, otherwise it will affect the next disassembly work.
Different functions of the Reitz centrifugal fan need to prepare different work and materials in the disassembly so that the user can dismantle more favorablely. For the fan that transports gas or other harmful gases, the gates in the inlet and outlet pipes must be closed tightly. If necessary, block the blind plate. If the inlet and outlet are down, water can be poured into the pipeline for water sealing. The height of the water level to be filled should ensure that harmful gases in the pipeline do not leak into the workplace. After disassembly, the removed parts should be cleaned to remove dirt.
The sealing of the Reitz fan is also important, so the gap of the seal must be measured before disassembly, so as to better maintain the sealing of the fan and make the fan work in the next use.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn