Overshot go into the heart of the drill pipe, the slider move up, make the tube socket head can be inserted into the center, when on the slider move up tight, using friction lift drill, remove loose again after the slider, by means of the connection string to slide along the block should tighten, set aside the center pipe, but in front of the salvage must first determine the bit in the bottom of the hole position, can be in a thin plate with bolts tight end of drill pipe, Drop the drill pipe to the bottom of the hole and press it on the drill bit. After waiting for a moment, it is proposed that the relative position of the drill bit at the bottom of the hole and the center of the rotary plate of the drill can be determined by observing the indentation left by the center pipe of the drill bit on the board, and then move the drill or rotary plate so that the center of the rotary plate is directly in front of the center pipe of the injured head, so as to ensure that the fishing device can be inserted into the center pipe accurately.
Overshot Assembly,Fishing Tools,Overshot Assembly For Sale,Overshot Fishing Assembly WUXI XINZUAN GEOLOGICAL EQUIPMENT CO.,LTD. , https://www.wxsmrxz.com
The content of the training consists of three parts: lecture, simulation test and customer site communication. The Secopoint tool management system has been used by many customers in Greater China, and as sales demand continues to increase, related sales and technical staff face greater challenges.
In addition to providing basic product distribution functions, the Secopoint tool management system also provides the required reports for the management of the customer's business. The data for the report usually covers all aspects of the record, but you need to know that the tool is being used for the classification report for each part and cost center, and it should be set up correctly.
Through training, trained sales and technical staff gained more knowledge to meet customer needs and exercised combat capabilities through simulation tests. Finally, they also had further communication with the customer's tool supervisor at the customer site.
Secopoint Tool Management System Training in Shangao Greater China was held in Shanghai
From February 2nd to 4th, 2010, the training of Secopoint tool management system in Greater China was held in Shanghai. The presenter was Joakim Johansson, head of the Secopoint project from the Swedish headquarters, and the relevant sales and technical staff from the Mainland and Taiwan participated in the training.